A Proud Tradition of Service Since 1958

Buy And Sell

To make a "Wanted" or "For Sale" submission, e-mail text and pictures using the word "Posting" in the subject line. Please keep text to a minimum.  Posting Period: Postings will be deleted after three months unless an additional three month period is requested.  Note: This space is available to visitors of The Pottery Supply House website to post buy & sell notices of items of interest to clayworkers (subject to PSH review). PSH makes no claims or guarantees about items or services offered for sale except for those purchased from PSH. Transaction terms and their fulfillment are solely the affair of the buyer and seller.




Pug Mill For Sale  July 10, 2024
Older Model Pug Mill, 120 Volt. Motor in good working order and in good condition.  It is missing 2 flanges, one on the upper left side of the machine and one on the lower right  side of the machine.  The rubber ring inside of the machine is intact and the auger is in intact and in very good condition.  Located near Newmarket, Ontario.  $1200.00 obo.  Contact: zephyr.wood@hotmail.com




Enameling Kiln For Sale  July 3, 2024

Amaco Enamel Electric Kiln 
Model 67F
115-120 Volts
17.8 Amps
Single phase
2.1 kilowatts
Max temp 2000F
Located in St. Catharines, ON. Looking for $200 OBO.




Kiln For Sale June 21, 2024

Electric Kiln for sale in Bear River, Nova Scotia.

10 cu.ft. Electric kiln/240V-63Amps.
ConeArt model #2327-10
Inside dimensions 28”x 27”. Outside dimensions 35”x 33”.
Three Low-Med-High switches. Sectional kiln( top 12” can be removed)
Metal frame base, shelves and posts included…asking $3,500.

Please contact Pat Woods:       e mail, redhandedpottery@yahoo.ca.   
phone(902)467-0532.   (I am not on Facebook)



Kiln For Sale June 21, 2024
7 cu.ft. Electric kiln. 215V/30Amps
EVENHEAT model# 4320 XLD.
Inside dimensions 23”wide x 17” deep.
Outside dimensions 30”wide x 21”deep.
Includes five 3/4”x21” diam. round shelves, six half rounds, 2 boxes mixed posts and a new set of elements. Needs new lid. Asking $500-  obo.

Please contact Pat Woods:       e mail, redhandedpottery@yahoo.ca.   
phone(902)467-0532.   (I am not on Facebook)



Kiln Wanted  June 12, 2024
I'm looking for a table-top pottery kiln or test kiln that is 120V, and fires to cone 6.



Extraction Fan For Sale  June 8, 2024

Quiet running extraction fan for sale. Cone Art motor. I’m leaving the country so make me an offer and come pick it up (delivery not possible). Located in South Etobicoke.

Please call or text 416-312-7445 or email (delayed response) sasha_bateman@hotmail.com




Studio Contents For Sale  May 15, 2024


For Sale for reasonable offer:
Complete contents of production pottery workshop, all except
Econo-kiln purchased from PSH: Euclid kiln with all
electronics, Econo kiln k-30, all kiln furniture: Brent CXC wheel, 300
bats 8" - 24":  50 -  five gallon pails mixed glazes, 1,000 lbs +glaze
chemicals, stains and materials; sculpting, turning, trimming tools:
200+ bisque pieces (50 yarn holders): 300 + finished pieces ( 16"
platters, bowls mugs etc).  No partial sales: all or nothing.
Stratford area.

email: jfrose45@gmail.com




Kiln For Sale  May 11, 2024
I have a kiln for sale in Woodstock Ontario. It's a Euclid R280 with Bartlett Genesis 2.0 control, 240 volt with 5 full shelves and 1 half shelf. Some furniture posts available but keeping most for my other kiln.
The kiln works perfectly and has always been well maintained.
$5500.00 obo. Contact: Kris@lighthousepottery.ca




Kiln For Sale  May 9, 2024


This kiln shown was built in 2022 but never fired. The inside is all new brick purchased from Alphatherm Inc in Markham. PA 23 soft brick and new hard brick on the floor. The outer layer of brick insulation is brick salvaged from our last kiln. Selling as a lot, at a cost that is less than we paid in 2022. Asking $5000.00 or best offer


One set of Rex-O-Therm Burners Propane burners 380,000 BTU’s each CSA approved

New Hard Brick 9”x4.5”x3” 40 pcs

Old Hard Brick 9”x4.5”x3” 100pcs (approx.)

New Soft Brick 9”x4.5”x3” 520 pcs (12 boxes of 12 pcs unopened)

#1 Arch Brick 9”x4.5”x2.5” 100pcs

Ceramic Fibre blanket 1” thick attached to a wire frame, 2300 degree rating as the second roof layer

The outer insulating layer is salvaged brick from the old kiln and a mix of k-23 and k-20 soft brick, the majority re whole bricks, some are cracked, but still useful. Approximately 700pieces.

The kiln is just outside of Brighton Ontario and will be stored securely in boxes for transport

The metal frame is new and will be cut down for transportation.

Shelving is available, but not included.

I can be reached at drclark42@gmail.com., for further information if required



Decal Making Supplies For Sale  May 3, 2024 
I have a stash of decal making supplies available for purchase including overglaze, mediums and traditional decal paper. Over 20 colours of overglaze available, including standard lead/cadmium free colours, metallics, plus specialty intense colours and gold pinks. Can sell in 50g batches, up to 1kg. Lots of traditional paper in 11x17 size with some printing mediums and covercoats too.



Pugmill For Sale  May 3, 2024


Used Walker pugmill, measures 19" x 15.5" x 14" deep, stainless steel contacts, includes hopper leading to milling section, with 1.5" dia, shaft including (17) 3" x 3" paddles on common shaft and 8 stationary paddles welded to inner wall of hopper. Milling section leads to 8" dia. auger discharge leading to 2" x 4" side-end discharge. Mounted on mild steel frame, shaft is driven by 3/4 HP, 1 phase, 60 cycle, 115/230V motor through gearbox, hopper section includes a hinged cover. Good condition. $750.  Contact jameshopkinsclay@gmail.com



Closed Pottery Factory Clearout  Mar. 30, 2024

All items are in used, but good and operable condition. Some items need refurbishment which is on my list to do. Will disclose all details of items to interested parties. Have photos and can text to share. Please email hitchmss@gmail.com so I can establish you're not a bot, before sharing a cell phone number. Located in Felicity OH, outside of Cincinnati. Can arrange trucking. Prices are asking prices, so reasonable offers are considered, especially those buying in bulk. Current retail prices are listed for your comparison: most of my asking prices are 40% or more off retail. Might consider trading for some select equipment and materials. Thank you! 





Kiln For Sale  Mar. 13, 2024


Evenheat 6320XL kiln for sale.  Old but rarely used.  Height 32 inches floor to lid.  28.5 inches diameter. There is an add on collar with 2 elements that make up that 32 inches in height.  240 volt 60 amps.  Has cone sitter.  Switches for temp increase off/on. In really good shape.  Comes with 1 shelf.  21" diameter.  Asking 800.  No holds.
Contact:  dbarnesonfire@rogers.com 



Ohaus Scale For Sale  Feb. 9, 2024

New Ohaus scale. $50

700 series 2610g
No weights never used. 



Potter's Wheel For Sale  Jan. 24, 2024


Barely used Shampoo VL-Lite Pottery Wheel (purchased end of September).
$1,100. Brampton area.
Call 416-802-7032 



Crucible Kilns For Sale  Jan. 13, 2024

Two crucible kilns for glass blowing.
Designed and made by PSH. Never used. Comes with lots of extras
Asking $ 6,000.00 o.b.o.

Contact: lia.glass.dream@xplornet.ca




Kiln Shelves For Sale  Jan. 13, 2024


26” half round shelves x 3 . Good shape.
New, $65 each. $80 for 3.
Contact: potteryintheforest@icloud.com





12 Kilns For Sale  Dec, 20, 2023 

See details



Gas Kiln For Sale  Oct. 122023

Rockcliffe Pottery is selling a Reduction Car Kiln with all updated government inspected safety features. Paid $18,000 for all the ESA safety improvements to all the gas mechanisms 3 years ago. Includes all parts, and accessories.


Contact: tonoorster@gmail.com 



Ceramic Arts Studio For Sale in THE TURKS & CAICOS ISLANDS  Aug. 28, 2023     



Two Glass Kilns for Sale  Oct. 4, 2021


  1. Outside Dimension (inches): 112.5 (L) x 64.5(W) X 42 (H)

  2. Inside Dimension (inches): 102 (L) x 55.5(W) X 18 (Deep)

  3. Kiln, hoist and control panel

  4. Read to install and use

  5. Well maintained

  6. Good working condition

  7. Model Number CST-1813

  8. Pricing $8,000 Canadian each or best offer

 For more information, email: James.Lee@barbican.ca


Also for sale, Roland LEJ 640 printer:


$14000 Canadian or best offer. For more information, email: James.Lee@barbican.ca