A Proud Tradition of Service Since 1958




Regular price
Sale price
Regular price
Sold out
Unit price
Shipping calculated at checkout.

Model F-120

Includes a CSA-specified lid safety switch, not featured on the standard model. The switch cuts power when the lid is opened, eliminating the possibility of electrical shock.
Lamp Working Kiln
Anneal large glass figurines in the digital F-120 lamp working kiln. Raise the spring-loaded vertical-drop door to insert a glass figurine with a punty rod. Lower the door. The punty rod extends outside the firing chamber through the smaller punty rod door. This allows the glass to anneal safely.
You can make figurines up to 5” tall in the F-120. Maintain the annealing temperature indefinitely with the Sentry Xpress 3-key controller.

The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.

Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon Kilns

  • Design programs with up to 8 segments (steps) in Ramp-Hold mode.
  • Fire to a single temperature at a single speed in the simplified Single Speed mode.
  • Ramp-Hold mode can store 4 programs.
  • Skip a segment in Ramp-Hold during firing without having to stop the kiln to reprogram.
  • Change the target temperature in Ramp-Hold during firing without having to stop the kiln to reprogram.
  • Hold (soak) the temperature in both Single Speed and Ramp-Hold. Experiment with Hold to improve color saturation of china paints.
  • Add Hold Time during firing without having to stop the kiln to reprogram.
  • Control both heating and cooling in Ramp-Hold.
  • Program Review lets you check the program you are about to fire.
  • Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Use this to remind yourself to check on the kiln.
  • Temperature display throughout firing and cooling in your choice of °F or °C
  • Thermocouple Offset adjusts the thermocouple readout.
  • Set the Delay to turn on the kiln later to suit your schedule.
  • Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
  • 12 Month Warranty
  • LED Lights show whether you are in program, review, or firing mode.
  • Colorful, illustrated instruction manual. Download it from the “Additional Information” section below to review these features in more detail.

Ease of operation will delight you. Never before has lamp work been so easy in this price range. Imagine the massive, award-winning figurines you will be able to make with this kiln.

The F-series lid elements use a new element groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The element is mounted in the top of the kiln for safety. There is no sidewall element to touch with a punty rod. With the element in the top, you can also fuse and slump glass.

Imagine the glass you could sag, slump, and fuse with this kiln. Make small bowls, pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of dichroics. This kiln will give you a haven of creative enjoyment that you will enjoy for many years.

  • Digital Sentry Xpress with 8 Segment Ramp-Hold, Skip Segment & Program Review
  • On/off switch
  • Safety pilot light
  • The element groove in the roof eliminates pins.
  • 2 ½” insulating refractory firebricks in the roof, walls, and bottom
  • The element is seated in the top of the kiln.
  • Electrical components stay cool in a slotted base. No extra stand is needed.


Max. Temperature 1700F
Amps 14
Phase 1
Watts 1680
Nema 5-15P
Breaker Size 20
Circuit Wire Size 12 gauge
UL Std 499, CSA Y
Control Type Sentry Digital 3-key Glass Control
Voltage 120
Hertz 60
Sides 4
Chamber Volume 0.48 CU.FT.
13.59 litres
Chamber Width 10.75 in.
274 mm
Chamber Depth 11.00 in.
280 mm
Chamber Height 7.00 in
178 mm
Outer Size 20.50W x 23.00D x 20.00H in.
521W x 585D x 508H mm
Ship Size 28.50W x 28.50D x 27.00H in.
724W x 724D x 686H mm
Ship Weight 125.00 lbs.
56.7 kg
Price includes changes and inspection costs to meet Canadian electrical standards if applicable.